![]() ![]() These limits are designed to provide reasonable protection against harmful interference in a residential installation. Specifications Power supply 100 to 240 VAC, 6.3 A, 50 to 60 Hz Power consumption (without HDD) <= 45 W Operating temperature -10 to +55 ✬ (50 to 131 ☏) Relative humidity 10 to 90% Dimensions (W x D x H) TVN: (with front panel) 362 × 332 × 79 mm (14.25 × 13.07 × 3.11 in.1 Advanced security made easy plug&playsecurity DVR Channel Digital Video Recorder Operating Instructions SW341-DNF / SW343-DP2 / SW343-DPM / SW344-DPS SR341-DNFĢ Before You Begin FCC Verification: NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. Provides access to logout, reboot, and shutdown options. Provides reference information to the various toolbars and menus within the interface. See Figure 4 and Table 1 below for a description of the functions available.Ĭonfigures PTZ settings. Regularly used functions in live view can be quickly accessed by clicking the right-button of the mouse on the camera image. Live view mode Name Description Live mode is the normal operating mode of the unit where you watch live pictures from the cameras. See Figure 2 on page 2 for the locations of the controls. Web browser control The buttons on the front panel control most functions. The mouse is immediately operational and the pointer should appear. Connect the mouse to the NVR by plugging the mouse USB connector into the USB port on the front panel. Web browser Front panel and make changes to settings in the user interface.Operating the TVN 10 There are several ways to control the unit: ![]() A steady RED light indicates internal health failure. Internal: A steady GREEN light indicates that the NVR is currently recording video/audio. No light indicates that the NVR is not connected to any network. Network: A steady GREEN light indicates that the NVR is currently connected to a network. A steady RED light indicates HDD failure. Description Status LEDs HDD: A steady GREEN light indicates that the NVR is accessing the HDD in read or write operation. Pause: In live view, freeze the last image of the live display for all active cameras displayed. In playback mode, playback a camera in the reverse direction. Playback buttons Reverse: In live view mode, use to play back the earliest video. Live view button Switch to live view mode. Universal Serial Bus (USB) 3.0 port.įigure 2: Front panel controls For detailed information on all the button functions, please refer to the user manual. The HDMI connection supports both digital audio and video. Connect an RCA connector for audio input Connect to speakers for audio output. Connect up to four alarm inputs and one alarm relay output. Embedded ports to connect up to eight IP cameras (depending on model). or įigure 1: Back panel connections (8-channel PoE shown) 1. Trade names used in this document may be trademarks or registered trademarks of the manufacturers or vendors of the respective products. Interlogix is part of UTC Building & Industrial Systems, a unit of United Technologies Corporation. TruVision NVR 10 Quick Start Guide P/N 1072767B-EN Ĭopyright Trademarks and patents Contact information © 2014 United Technologies Corporation.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |